Connect to network
zNID Hardware Installation Guide
49
Connecting phone terminals
The zNID 24xx models have the ability to connect POTS via RJ-11.
Connecting POTS
The zNID 24xx models have the ability to connect POTS via RJ-11 connector.
The terminal connections are shown in Figure 17.
1 Locate the subscriber’s telephone wire pair.
Figure 17: Connect phone lines
2 If the wire pair is not terminated, follow local practices to attach an RJ-11
connector.
3 Plug the wire pair with RJ-11 connector into one of the zNID RJ-11 phone
jacks.
4 Repeat steps 1-3 as needed to connect additional phone lines.
For pinout information for the POTS connector, see POTS pinouts on page 54.
