User Manual

zNID 24xx series LEDs
zNID Hardware Installation Guide
27
zNID 24xx series LEDs
The LEDs vary depending on the model of zNID. See zNID 24xx models on
page 20 for a complete list of zNID models.
GPON
Figure 7: zNID-GPON-24xx LEDS
Table 4: zNID-GPON-24xx LEDs
LED Name Color Indicates
STATUS Green: Heartbeat
(1 short blink every
5 seconds)
Normal Operation
Green: Rapid blink
(10/sec)
Unit has been reset to Factory
Defaults / is unconfigured
Green: Alternating
fast blinking and
Off (1 second rapid
blink/1 second off)
EZ Touch communications in process
Green: Slow blink
(1/second)
Remote Mgt Access (OMCI, SNMP,
HTTP, Telnet, or TR-069)
Green: On Reboot or restart in process
Off Power off
BATT Yellow: On Operating on Battery Power
Yellow: Slow blink
(1/sec)
Battery Alarm (Low Battery, Missing,
or Replace)
Off Normal operation on AC power
ALARM Red: On Running on battery
Red: 50% cycle: 1
sec Rapid Blink/
1 sec Off
EZ Touch actions pending -- SW or
Config update required
Off Normal operation on AC power