User's Manual

zNID 24xxA1 Installation
50 zNID 24xxA1 Hardware Installation Guide
Connecting Ethernet ports
The zNID-24xxA1 series models have up to 4 Gigabit Ethernet ports.
Connect Ethernet ports
The zNID provides RJ eight pin modular jacks (RJ45) for Ethernet
connections. Ethernet connections can be used to deliver any packet services
including IPTV, data, and VoIP.
For Ethernet services, connect a Category 5 or a Category 6 cable to an RJ45
interface as shown in Figure 15.
1 Locate the Ethernet LAN cable.
2 If the cable is not terminated, follow local practices to attach an RJ-45
connector.
3 Plug the Ethernet cable into the appropriate RJ-45 Ethernet port.
Figure 15: The RJ-45 Ethernet ports.
4 Repeat steps 1-3 as needed to connect additional Ethernet cables.
For pinout information for the Gigabit Ethernet connector, see Gigabit
Ethernet pinouts on page 54.