User's Manual

Connect to network
zNID 24xxA1 Hardware Installation Guide
49
Connecting phone terminals
The zNID 24xxA1 models have the ability to connect POTS via RJ-11.
Connecting POTS
The zNID 24xxA1 models have the ability to connect POTS via RJ-11
connector.
The terminal connections are shown in Figure 14.
1 Locate the subscriber’s telephone wire pair.
Figure 14: Connect phone lines
2 If the wire pair is not terminated, follow local practices to attach an RJ-11
connector.
3 Plug the wire pair with RJ-11 connector into one of the zNID RJ-11 phone
jacks.
4 Repeat steps 1-3 as needed to connect additional phone lines.
For pinout information for the POTS connector, see POTS pinouts on page 55.