User's Manual

zNID 24xxA1 Series

26 zNID 24xxA1 Hardware Installation Guide

Protocol Support

• GPON uplink

– ITU-T G.984 (GPON)

– Multiple T-CONTS per device

– Multiple GEM Ports per device

–

1:1 mapping of GEM ports into T-CONTS with priority queue based scheduling

– Activation with automatic discovered SN and password in conformance

with ITU-T G.984.3

– AES-128 Decryption with key generation and switching

– FEC (Forward Error Correction)

– 802.1p mapper service profile on U/S

–

Mapping of GEM Ports into a T-CONT with priority queues based scheduling

– Support for Multicast GEM Port

• Ethernet/IP

– Bridging and switching (802.1D / 802.1 Q)

– Eight traffic classes with 802.1p

– 802.3

flow control

– MAC address entries

For OMCI-configured traffic flows, no limit (no bridge table)

For Bridged VLANs

, configured via Web UI or CLI in RG Mode, 4096 bridge

table entries are supported. (only the most recent 100 entries are displayed).

– VLAN tagging / untagging

– VLAN stacking (Q-in-Q)

– MAC limiting

– 802.1x Ethernet Authentication

– PPPoE client

• DHCP server, DHCP client

• FTP, TFTP

• Telnet

• HTTP

• SSH

• SNMP

• NAT

• QoS

– 802.1P/Q priorization

– ToS IP Precedence

– Traffic shaping – bandwidth management and rate limiting

• Firewall and Security

Table 3: zNID 24xxA1 common specifications (Continued)

Specifications Values