User's Manual

About This Guide
14 zNID 24xxA1 Hardware Installation Guide
CE
CE compliance cerfications has been obtained for the following equipment:
GPON 4 Port WiFi Gateway
• ZNID-GPON-2424A1, ZNID-GPON-2424A1-XX,
ZNID-GPON-2424A1-NYY, ZNID-GPON-2424A1-XX-NYY;
• ZNID-GPON-2426A1, ZNID-GPON-2426A1-XX,
ZNID-GPON-2426A1-NYY, ZNID-GPON-242461-XX-NYY;
• ZNID-GPON-2408A1, ZNID-GPON-2408A1-XX,
ZNID-GPON-2408A1-NYY, ZNID-GPON-2408A1-XX-NYY;
• ZNID-GPON-2428A1, ZNID-GPON-2428A1-XX,
ZNID-GPON-2428A1-NYY, ZNID-GPON-2428A1-XX-NYY;
GE 4 Port WiFi Gateway
• ZNID-GE-2424A1, ZNID-GE-2424A1-XX, ZNID-GE-2424A1-NYY,
ZNID-GE-2424A1-XX-NYY;
• ZNID-GE-2426A1, ZNID-GE-2426A1-XX, ZNID-GE-2426A1-NYY,
ZNID-GE-242461-XX-NYY;
• ZNID-GE-2408A1, ZNID-GE-2408A1-XX, ZNID-GE-2408A1-NYY,
ZNID-GE-2408A1-XX-NYY;
• ZNID-GE-2408A1, ZNID-GE-2428A1-XX, ZNID-GE-2428A1-NYY,
ZNID-GE-2428A1-XX-NYY;
"XX"-NA, EU, UK, SG, which indicates the power adpter plug type. For the
optional "NYY" used only in Customer-specific configurations, "N" identifies
the Revision number of the configuration from 0 to 9 or black, and "YY"
specifies the customer using a unique two letter indentifer from A to Z or
blank.
The equipment named above is confirmed to comply with the requirements
setout in the Council Directive on the Approximation of the Laws of the
Member States relating to Electromagnetic Compatibility (2004/108/EC),
Low-voltage Directive (2006/95/EC) and R&TTE (1999/5/EC). The
equipment passed the test which was performed according to thefollowing
European standards:
• ETSI EN 301 489-17 V2.1.1: 2009
• ETSI EN 301 489-1 V1.9.2: 2011
• ETSI EN 300 328 V1.7.1: 2006
• EN 62311: 2008
• EN 60950-1: 2006+A11 2009+ A1:2010 + A12:2011