Installation manual

© Hills Industries 2009 Page 53
Feature 133 new Zones 105-112 Configuration Group
Segments 1-8
16 16 16 16 16 16 16 16
Feature 133 contains the Configuration Group (zone type) for zones 105-112. Segment 1 is for zone 105, and Segment 8 is
for zone 112.
Feature 134 new Zone Area Select - Zones 105-112
Feature 134 is used to select the area(s) that zones 105-112 reside in. A zone may reside in any combination of the eight
areas. If a burglary zone resides in more than one area, it will only be active when all areas are armed. A zone that resides
in more than one area will be reported to its lowest area.
Refer to Feature 60 for the zone area select table.
Feature 135 new Zones 113-120 Configuration Group
Segments 1-8
16 16 16 16 16 16 16 16
Feature 135 contains the Configuration Group (zone type) for zones 113-120. Segment 1 is for zone 113, and Segment 8 is
for zone 120.
Feature 136 new Zone Area Select - Zones 113-120
Feature 136 is used to select the area(s) that zones 113-120 reside in. A zone may reside in any combination of the eight
areas. If a burglary zone resides in more than one area, it will only be active when all areas are armed. A zone that resides
in more than one area will be reported to its lowest area.
Refer to Feature 60 for the zone area select table.
Feature 137 new Zones 121-128 Configuration Group
Segments 1-8
16 16 16 16 16 16 16 16
Feature 137 contains the Configuration Group (zone type) for zones 121-128. Segment 1 is for zone 121, and Segment 8 is
for zone 128.
Feature 138 new Zone Area Select - Zones 121-128
Feature 138 is used to select the area(s) that zones 121-128 reside in. A zone may reside in any combination of the eight
areas. If a burglary zone resides in more than one area, it will only be active when all areas are armed. A zone that resides
in more than one area will be reported to its lowest area.
Refer to Feature 60 for the zone area select table.