Installation manual

© Hills Industries 2009 Page 48
Feature 78 new Configuration Group 6 Characteristic Select
Seg 1 4 Seg 2 257 Seg 3 25678 Seg 4 new Seg 5 new
Use ‘Configuration Group Characteristic table’ described in Feature 68, of this section.
Feature 79 Configuration Group 7 Alarm Event Code
Segment 1 3
Feature 79 contains the Contact I.D. event code sent for zone configuration group 7 alarm reports. The desired event code
should be chosen from the Contact I.D. Configuration Group Event Table in the Appendix section.
Feature 80 new Configuration Group 7 Characteristic Select
Seg 1 4 Seg 2 2578 Seg 3 25678 Seg 4 new Seg 5 new
Use ‘Configuration Group Characteristic table’ described in Feature 68, of this section.
Feature 81 Configuration Group 8 Alarm Event Code
Segment 1 3
Feature 81 contains the Contact I.D. event code sent for zone configuration group 8 alarm reports. The desired event code
should be chosen from the Contact I.D. Configuration Group Event Table in the Appendix section.
Feature 82 new Configuration Group 8 Characteristic Select
Seg 1 4 Seg 2 257 Seg 3 245678 Seg 4 new Seg 5 new
Use ‘Configuration Group Characteristic table’ described in Feature 68, of this section.
Feature 83 Configuration Group 9 Alarm Event Code
Segment 1 3
Feature 83 contains the Contact I.D. event code sent for zone configuration group 9 alarm reports. The desired event code
should be chosen from the Contact I.D. Configuration Group Event Table in the Appendix section.
Feature 84 new Configuration Group 9 Characteristic Select
Seg 1 4 Seg 2 2567 Seg 3 25678 Seg 4 new Seg 5 new
Use ‘Configuration Group Characteristic table’ described in Feature 68, of this section.
Feature 85 Configuration Group 10 Alarm Event Code
Segment 1 3
Feature 85 contains the Contact I.D. event code sent for zone configuration group 10 alarm reports. The desired event
code should be chosen from the Contact I.D. Configuration Group Event Table in the Appendix section.
Feature 86 new Configuration Group 10 Characteristic Select
Seg 1 4 Seg 2 2457 Seg 3 245678 Seg 4 new Seg 5 new
Use ‘Configuration Group Characteristic table’ described in Feature 68, of this section.