Installation manual

10
Expansion
Power Trouble
Expansion
Low Battery
Expander
Box Tamper
Expansion
Over-current
Expansion
Trouble
Expansion
Siren trouble
Zone
Tamper, Press
U
Zone
Low Battery, Press
U
Zone
Lost, Press
U
Zone
Trouble, Press
U
The main power to an expansion power supply is not on.
An expansion power supply has a low battery.
A box containing an expansion device has been opened.
A short circuit of an expansion device’s power supply has occurred.
An expansion device or keypad is not reporting to the control panel.
An expansion device has detected some form of trouble on the bell or
siren circuit.
A zone is tampered. Press [U] to identify the tampered zone.
A wireless device has a low battery. Press [U] to identify the zone.
A wireless or multiplexed zone device is not reporting to the control.
Press [U] to identify the zone.
A zone is experiencing some form of trouble (probably wiring). Press
[U] to identify the zone.
The following chart provides the device numbers that will be reported for trouble conditions.
KEYPAD PARTITION
12345678
1 192 193 194 195 196 197 198 199
2 200 201 202 203 204 205 206 207
3 208 209 210 211 212 213 214 215
4 216 217 218 219 220 221 222 223
5 224 225 226 227 228 229 230 231
6 232 233 234 235 236 237 238 239
7 240 241 242 243 244 245 246 247
8 248 249 250 251 252 253 254 255