Installation manual

SPECIFICATIONS
OPERATING POWER 16.5 VAC 25, 40, or 50 VA Transformer
AUXILIARY POWER
W/25 VA Transformer 12 VDC Regulated 500 mA
W/40 or 50 VA Transformer 12 VDC Regulated 1 AMP
W/NX-320 Power Supply 12 VDC Regulated 3.5 AMPS
LOOP RESISTANCE
Standard Loop 300 Ohms Maximum
2-Wire Smokes 30 Ohms Maximum
BUILT-IN SIREN DRIVER 2-tone (Steady and Yelp)
LOOP RESPONSE Selectable 50mS or 500mS
OPERATING TEMPERATURE 32 to 120 degrees F
LED CODE PAD DIMENSIONS 16.25cm Wide
10.15cm High
2.8cm Deep
LCD CODE PAD DIMENSIONS 16.25cm Wide
13.45cm High
2.50cm Deep
METAL ENCLOSURE DIMENSION 28.60cm Wide
28.60cm High
8.90cm Deep
SHIPPING WEIGHT 4 kg
WARRANTY STATEMENT
DIRECT ALARM SUPPLIES GUARANTEES THIS PRODUCT AGAINST DEFECTIVE PARTS AND
WORKMANSHIP FOR TWENTY-FOUR (24) MONTHS FROM DATE OF PURCHASE. IF ANY DEFECT
APPEARS DURING THE WARRANTY PERIOD RETURN IT TO DAS, POSTAGE PREPAID. THE UNIT WILL
BE REPAIRED AND RETURNED. DAS ASSUMES NO LIABILITY FOR CONSEQUENTIAL OR INDIRECT
DAMAGE AND ACCEPTS NO RESPONSIBILITY FOR REPAIRING DAMAGE TO THE PRODUCT CAUSED BY
MISUSE, CARELESS HANDLING, OR WHERE REPAIRS HAVE BEEN MADE BY OTHERS.
NO OTHER GUARANTEE, WRITTEN OR VERBAL, IS AUTHORIZED BY OR ON BEHALF OF DIRECT ALARM
SUPPLIES 9 NOWILL STREET CONDELL PARK NSW.
DIRECT ALARM SUPPLIES
9 NOWILL STREET CONDELL PARK
NSW 2200 AUSTRALIA
PHONE [phone]
FAX [phone]
NX-16 INSTALLATION MANUAL
NX16IB98 REV. B (10-15-98)