Installation manual

38
FEATURE 85 CONFIGURATION GROUP 10 ALARM EVENT CODE
SEGMENT 1
3
Feature 85 contains the Contact I.D event code sent for zone configuration group 10 alarm reports. The desired event code should be chosen
from the Contact I.D Configuration Group Event Table in the Appendix section.
FEATURE 86 CONFIGURATION GROUP 10 CHARACTERISTIC SELECT
SEGMENT 1
4 SEGMENT 2 2457 SEGMENT 3 245678
Use "Configuration Group Characteristic table" described in Feature 68, of this section.
FEATURE 87 CONFIGURATION GROUP 11 ALARM EVENT CODE
SEGMENT 1
3
Feature 82 contains the Contact I.D event code sent for zone configuration group 11 alarm reports. The desired event code should be chosen
from the Contact I.D Configuration Group Event Table in the Appendix section.
FEATURE 88 CONFIGURATION GROUP 11 CHARACTERISTIC SELECT
SEGMENT 1
4 SEGMENT 2 2578 SEGMENT 3 245678
Use "Configuration Group Characteristic table" described in Feature 68, of this section.
FEATURE 89 CONFIGURATION GROUP 12 ALARM EVENT CODE
SEGMENT 1
3
Feature 89ontains the Contact I.D event code sent for zone configuration group 12 alarm reports. The desired event code should be chosen
from the Contact I.D Configuration Group Event Table in the Appendix section.
FEATURE 90 CONFIGURATION GROUP 12 CHARACTERISTIC SELECT
SEGMENT 1
4 SEGMENT 2 25678 SEGMENT 3 25678
Use "Configuration Group Characteristic table" described in Feature 68, of this section.
FEATURE 91 CONFIGURATION GROUP 13 ALARM EVENT CODE
SEGMENT 1
3
Feature 82 contains the Contact I.D event code sent for zone configuration group 13 alarm reports. The desired event code should be chosen
from the Contact I.D Configuration Group Event Table in the Appendix section.
FEATURE 92 CONFIGURATION GROUP 13 CHARACTERISTIC SELECT
SEGMENT 1
4 SEGMENT 2 2567 SEGMENT 3 245678
Use "Configuration Group Characteristic table" described in Feature 68, of this section.
FEATURE 93 CONFIGURATION GROUP 14 ALARM EVENT CODE
SEGMENT 1
3
Feature 93 contains the Contact I.D event code sent for zone configuration group 14 alarm reports. The desired event code should be chosen
from the Contact I.D Configuration Group Event Table in the Appendix section.
FEATURE 94 CONFIGURATION GROUP 14 CHARACTERISTIC SELECT
SEGMENT 1
4 SEGMENT 2 25678 SEGMENT 3 245678
Use "Configuration Group Characteristic table" described in Feature 68, of this section.
FEATURE 95 CONFIGURATION GROUP 15 ALARM EVENT CODE
SEGMENT 1
3
Feature 95 contains the Contact I.D event code sent for zone configuration group 15 alarm reports. The desired event code should be chosen
from the Contact I.D Configuration Group Event Table in the Appendix section.
FEATURE 96 CONFIGURATION GROUP 15 CHARACTERISTIC SELECT
SEGMENT 1
SEGMENT 2 25 SEGMENT 3 25678
Use "Configuration Group Characteristic table" described in Feature 68, of this section.