Installation manual

FEATURE 64 ZONE AREA SELECT - ZONES 33-40

Feature 64 is used to select the area(s) that zones 33-40 reside in. A zone may reside in any combination of the

eight areas. If a burglary zone resides in more than one area, it will only be active when all areas are armed. A

zone that resides in more than one area will be reported to its lowest area. Feature 64 has 8 segments. Segment 1

corresponds to zone 33 and Segment 8 corresponds to zone 40. REFER TO FEATURE 60 IN THIS SECTION

FOR THE ZONE AREA SELECT TABLE.

FEATURE 65 ZONES 41-48 CONFIGURATION GROUP

SEGMENTS 1-8

16 16 16 16 16 16 16 16

Feature 65 contains the Configuration Group (Zone type) for zones 1-8. Segment 1 is for zone 41, and Segment 8

is for zone 48.

FEATURE 66 ZONE AREA SELECT - ZONES 41-48

Feature 66 is used to select the area(s) that zones 41-48 reside in. A zone may reside in any combination of the

eight areas. If a burglary zone resides in more than one area, it will only be active when all areas are armed. A

zone that resides in more than one area will be reported to its lowest area. Feature 66 has 8 segments. Segment 1

corresponds to zone 41 and Segment 8 corresponds to zone 48. REFER TO FEATURE 60 IN THIS SECTION

FOR THE ZONE AREA SELECT TABLE.