Installation manual

FEATURE 59 ZONES 17-24 CONFIGURATION GROUP

SEGMENTS 1-8

16 16 16 16 16 16 16 16

Feature 59 contains the Configuration Group (Zone type) for zones 1-8. Segment 1 is for zone 17, and Segment 8

is for zone 24.

FEATURE 60 ZONE AREA SELECT - ZONES 17-24

Feature 60 is used to select the area(s) that zones 17-24 reside in. A zone may reside in any combination of the

eight areas. If a burglary zone resides in more than one area, it will only be active when all areas are armed. A

zone that resides in more than one area will be reported to its lowest area. Feature 60 has 8 segments. Segment

1 corresponds to zone 17 and Segment 8 corresponds to zone 24.

AREA 1 AREA 2 AREA 3 AREA 4 AREA 5 AREA 6 AREA 7 AREA 8

SEGMENT 1 – ZONE 17

(1) 2 3 4 5 6 7 8

SEGMENT 2 – ZONE 18

(1) 2 3 4 5 6 7 8

SEGMENT 3 – ZONE 19 (1) 2 3 4 5 6 7 8

SEGMENT 4 – ZONE 20 (1) 2 3 4 5 6 7 8

SEGMENT 5 – ZONE 21 (1) 2 3 4 5 6 7 8

SEGMENT 6 – ZONE 22 (1) 2 3 4 5 6 7 8

SEGMENT 7 – ZONE 23 (1) 2 3 4 5 6 7 8

SEGMENT 8 – ZONE 24 (1) 2 3 4 5 6 7 8

FEATURE 61 ZONES 25-32 CONFIGURATION GROUP

SEGMENTS 1-8

16 16 16 16 16 16 16 16

Feature 61 contains the Configuration Group (Zone type) for zones 1-8. Segment 1 is for zone 25, and Segment 8

is for zone 32.

FEATURE 62 ZONE AREA SELECT - ZONES 25-32

Feature 62 is used to select the area(s) that zones 25-32 reside in. A zone may reside in any combination of the

eight areas. If a burglary zone resides in more than one area, it will only be active when all areas are armed. A

zone that resides in more than one area will be reported to its lowest area. Feature 62 has 8 segments. Segment 1

corresponds to zone 25 and Segment 8 corresponds to zone 32. REFER TO FEATURE 60 IN THIS SECTION

FOR THE ZONE AREA SELECT TABLE.

FEATURE 63 ZONES 33-40 CONFIGURATION GROUP

SEGMENTS 1-8

16 16 16 16 16 16 16 16

Feature 63 contains the Configuration Group (Zone type) for zones 1-8. Segment 1 is for zone 33, and Segment 8

is for zone 40.