User`s manual

SYSTEM DESCRIPTION
LINE DRAWINGS
(rigging),
and
æro series
aero
50
LX-218 LX-218R
DSP-4080
æro series
DSP-4080
aero 50
aero 50
LX-218
LX-218R aero
50
aero 50
PL-50
LX-218R
PL-LX218
PL-218S,
LX-218
PL-218S
KITW-100
2
2
The D.A.S. Audio offers units for
applications requiring precise control of the vertical
coverage and high sound pressure levels. The
is an externally powered, three-way, high
efficiency line array module which integrates two
15” low frequency units with 4” voice coils, four 8”
mid-range devices which utilize 2.5” voice coils
and two compression drivers with 3” coils and 1.5”
exit geometry in a single unit. The compression
drivers are coupled to two Serpis high frequency
plane wave adaptors insuring coherent high
frequency summing and the generation of a flat,
isophasic wave front. When increased sound
pressure level in the low frequency range is
required, the system can be used in conjunction
with the (stacking) or the
subwoofer units.
These systems are ideal for applications such
as large-scale outdoor/indoor events in arenas,
stadiums or theaters. Use of the digital
processor is recommended for the
systems digital processor
with the will adversely affect the sound
quality and may damage system components.
The loudspeakers used in the system feature
advanced technologies; new TAF (total air flow)
cooling systems, Neodymium magnetic circuits
which allow for important weight reductions,
titanium diaphragms for the high frequency
sections, and low-mid frequency cones
manufactured using crossed fibers and elastic
suspension that provide exceptional stability in the
vertical plane.
The model includes two , 15”
cone transducer with 4” EFW voice coils and
Neodymium magnet assemblies in a bass-reflex
configuration.
aero 50 15GNR
. Not using the
These units are manufactured using 15/18 mm
Finnish Birch plywood. The enclosure
shape is trapezoidal with 5º angles. The
enclosures are rectangular. The
system incorporates captive rigging hardware
which is compatible with one another and
designed to provide a fast, simple and safe rigging
by means of quick release safety pins. Splay
angles can be changed from 0º to 3.2º in 0.8º
increments and from 3.2º to 9.6º in 1.6º
increments.
To facilitate transport, the units are
equipped with a front dolly panel attached
by means of the rigging hardware. The front dolly
panel is useful when rigging systems. The
units can be moved by way of the front
dolly panel attached by means of the rigging
hardware or by way of the a dolly for
vertically stacking (up to 3 units). The units
can be moved by way of the . Also an
accessory, (caster kit), is available.
Four , 8” speakers arranged on a V shape,
incorporating 2.5” EFW voice coils, Neodymium
magnet assemblies and TAF cooling system are
used for mid-range reproduction. High frequencies
are handled by two high frequency
compression drivers with 3” EFW coil, Neodymium
magnet and 1.5” exit coupled to twin plane
wave guide, designed by DAS Audio.
The plane wave adaptor also serves as
a heat sink for the compression driver.
8MN
M-75N
serpis
serpis
TM
TM
aero 50
ALL DIMENSIONS IN MILIMETERS
1350
592
475
627
LX-218
ALL DIMENSIONS IN MILIMETERS
1280
550
650
LX-218R
ALL DIMENSIONS IN MILIMETERS
1350
685
550
SOUNDPRODUCTSSOUNDPRODUCTS
WARNING!DO NOT SUSPEND FROM THIS HANDLEWARNING!DO NOT SUSPEND FROM THIS HANDLE
¡ATENCIÓN!NO CUELGUE LA CAJA DE ESTE ASA¡ATENCIÓN!NO CUELGUE LA CAJA DE ESTE ASA SOUNDPRODUCTSSOUNDPRODUCTS
WARNING!DO NOT SUSPEND FROM THIS HANDLEWARNING!DO NOT SUSPEND FROM THIS HANDLE
¡ATENCIÓN!NO CUELGUE LA CAJA DE ESTE ASA¡ATENCIÓN!NO CUELGUE LA CAJA DE ESTE ASA
3
Manual del Usuario / aero 50, LX-218 LX-218R /& User’s Manual