User`s manual

SPECIFICATIONS
18
Model
aero 50 LX-218 LX-218R
Frequency Range (-10 dB)
45 Hz – 20 kHz 28 Hz – 100 Hz 28 Hz – 100 Hz
Horizontal Coverage (-6dB)
90º Nominal --- ---
Vertical Coverage
Splay Angle Dependent --- ---
RMS (Average) Power Handling
(1)
LF: 2 x 700 W, MF: 700W,
HF: 300W
2000 W 2000 W
On-Axis Sensitivity1W/1m
LF: 99 dB SPL, MF: 104 dB SPL,
HF: 112dB SPL
103 dB SPL 103 dB SPL
Rated Maximum Peak SPL at 1 m
(2)
LF: 136 dB, MF: 139 dB,
HF: 141 dB
142 dB 142 dB
Transducers/Replacement Parts
LF: 2 x 15GNR/GM 15G
MF: 4 x 8MN/GM 8MN
HF: 2 x M-75N/GM M-75N
2 18LX/GM 18LX 2 18LX/GM 18LX
Nominal Impedance
LF: 8+8ohms, MF: 8ohms,
HF:16 ohms
4 ohms 4 ohms
Recommended Amplifier Power
4 amps 2 x 1400
@ 4 ohms
( 4 units aero 50)
2 x 2400 W @ 4 ohms
( 2 units LX-218)
2 x 2400 W @ 4 ohms
( 2 units LX-218)
Enclosure Geometry
Trapezoidal 5º
Rectangular Rectangular
Enclosure Material
Birch Plywood Birch Pl
ywood
Birch
Plywood
Color/Finish
Black Paint Black Paint Black Paint
Rigging System
Integrated in box design --- Integrated in box design
Connectors
2 x NL8 wired as LF
1
±1, LF
2
±2,
MF±3, HF±4
2 x NL8 wired
±1 2 x NL8 wired
±1
Dimensions (HxWxD)
47.5 x 135 x 62.7 cm
(18.7 x 53.1 x 24.7 in)
55x128x65cm
(22x51x26in)
55x128x65cm
(22x51x26in)
Weight
85 kg (187 lbs) 78 kg (171.6
lbs) 95 kg (209 lbs)
Accessories
AX-aero50 Bumper
Ax-Combo12 Rigging Adapter
PL-50 Dolly Panel (included)
AX-aero50 Bumper
Pick Up Bar for AX-aero50 Bumper
AX-Combo12 Rigging Adapter
KITW-100 Caster kit
KITR-LX218 Rigging hardware kit
PL-LX218 Dolly Panel
PL-218S Flat Bed Dolly
AX-aero50 Bumper
Pick Up Bar for AX-aero50 Bumper
AX-Combo12 Rigging Adapter
KITW-100 Caster kit
PL-LX218 Dolly Panel (included)
PL-218S Flat Bed Dolly
(1).-Based on a 2 hour test continuously applying
6 dB crest factor pink noise (IEC shaped).
(2).-Maximum calculated Peak SPL based on sensitivity and RMS power handling.
Manual del Usuario / aero 50, LX-218 LX-218R /& User’s Manual