User manual

7
VANTEC-18A
- Bass-reflex powered subwoofer system
- 18" low frequency transducer
- Precise and powerful bass reproduction
- Top located pole mount socket
The VANTEC-18A bass powered system (Class
D amplifier) incorporates a 18” low frequency
transducer with a 4" voice coil mounted as a direct
radiator into a bass-reflex cabinet. The
loudspeaker is protected by a perforated steel
grille, sealed against corrosion using a powder
coat finish. The VANTEC-18A is designed for use in
biamped systems. A top located pole-mount
socket permits mounting full-range systems above
the VANTEC-18A and two bar handles makes
moving easy.
VANTEC-218A
- Powered subwoofer system
- 4000 Wpeak Class “D” amplifier
- EQ Presets: Deep, Loud
- Variable Low Pass Filter
- Sub level gain control, polarity reverse
- Front logo on/off switch
- Rigging points
- Rear located wheels for easy movement
The VANTEC-218A is a powered bass
subwoofer system designed to provide
extended bass response for the Vantec full-
range cabinets. A powerful amplifier drives dual
DAS 18LX long excursion bass loudspeakers
incorporating 4" voice coils and massive
magnet structures provide high power handling
and impressive output.
The VANTEC-218A is powered by a Class D
amplifier with switch mode power supply and a
4000 Wpeak power rating. The system includes
two balanced inputs (A-B) with stereo HPF
filtered output connections for satellite systems.
Defeating the HPF filter offers stereo “loop thru”
connections. The variable LPF crossover ranges
from 80 Hz-125 Hz. A gain control and polarity
reverse feature increase user control over the
system.
The compact VANTEC-218A cabinet is
manufactured using birch plywood and is
finished with a coating of the highly resistant
ISO-flex black paint for durability. The powder-
coated steel front grille protects the DAS
components. Handles on the sides and the rear
of the cabinet along with two rear located
wheels make moving the box easier.
Manual del Usuario / vantec series / User’s Manual