User manual

24
Manual del Usuario / action 500 series / User’s Manual
Instructions for AXU (only ACTION-508 and ACTION-512 enclosures)
Introduction
The AXU-ACT8 are designed for ACTION-508 and ACTION-508A enclosures.
The AXU-ACT12 are designed for ACTION-512 and ACTION-512A enclosures.
Safety Precautions
Wall plugs provided are to be used in brick walls only.
For other wall materials, source the suitable wall plug
before use.
DAS Audio is not responsible for use other than the
recommended or whether it be the result of insufficient
strength of the support structure. Use only the screws
and wall plugs supplied on surfaces that will provide
sufficient support. Do not use on surfaces such as plaster,
and gypsum. It is highly recommended and in most parts
of the world mandatory, that a safety cable be used to
secure the enclosure to the structure.
To ensure optimum safety, the installation should be
checked thoroughly at regular intervals replacing all
deteriorated elements.
Loosen the screws before reorienting the speaker.
Never force the rigging elements.
Contact a licensed rigger if there is any doubt.
Mounting instructions
You can consult the AXU-ACT8 mounting instructions for ACTION-508A enclosures on the web:
www.dasaudio.com
You can consult the AXU-ACT12 mounting instructions for ACTION-512A enclosures on the web:
www.dasaudio.com
TRD-6 / TRD-7 accessories
-10º
0º
The models ACTION-512A and ACTION-515A dispose the 35mm tripod socket with angle double (0º and -
10º) for stand mounting.
RIGGING (cont'd)