User manual

19
Manual del Usuario / action 500 series / User’s Manual
OPTIONS MENU
OPTIONS MENU OPTIONS MENU OPTIONS MENU
OPTIONS MENU OPTIONS MENU
OPTIONS MENU
OPTIONS MENU
OPTIONS MENU
OPTIONS MENU
OPTIONS MENU OPTIONS MENU OPTIONS MENU
OPTIONS MENU OPTIONS MENU
OPTIONS MENU
OPTIONS MENU
OPTIONS MENU
OPTIONS MENU
OPTIONS MENU
OPTIONS MENU OPTIONS MENU
OPTIONS MENU RESET DEVICE
BACK
BACK BACK BACK
BACK BACK
DIMMING: on
DIMMING: on
DIMMING: on
RESET DEVICE Are you sure?
BRIGHT: 0
BRIGHT: 0 BRIGHT: 0 BRIGHT: 0
LOGO: on
LOGO: on
LOGO: on
LOGO: on
LOGO: <on>
LOGO: on LOGO: on LOGO: on
LOGO: off >
LOGO: on
STAND-BY: off
STAND-BY: off STAND-BY: off STAND-BY: off
INFORMATION NO YES
CONTRAST: 0
CONTRAST: 0
CONTRAST: 0 CONTRAST: 0
MENU LOCK: off
MENU LOCK: off
MENU LOCK: off
MENU LOCK: off
MENU LOCK: off
MENU LOCK: off>
MENU LOCK: off
MENU LOCK: off
MENU LOCK: <on> MENU LOCK:<pw292
DLY UNITS: m
DLY UNITS: m
RESET DEVICE
RESET DEVICE RESET DEVICE RESET DEVICE
RESET DEVICE RESET DEVICE
DLY UNITS: m DLY UNITS: m
BACK
BRIGHT: 0 BRIGHT: +10
CONTRAST: -10 CONTRAST: +10
DIMMING: <on
DIMMING: on
DIMMING: on
DIMMING: off>
DIMMING: on
DIMMING: on DIMMING: on
STAND-BY: off> STAND-BY:<5min>
DLY UNITS: m>
DLY UNITS: <ft
Preset: live
HPF: off
Delay: 0m
Stand-By: off
Dimming: On
DIMMING: When active the screen lowers its luminosity after a few seconds. Default is "on"
1 2
live off
0 0.0m
O
+ 0 dB
LOCKED
PUSH TO UNLOCK
1 2
live off
0 0.0m
O
+ 0 dB
LOCKED
PUSH TO UNLOCK
1 2
live off
0 0.0m
O
+ 0 dB
PASSWORD: _ _ _
OPTIONS:
In this sub-menu the user can configure all the non-audio related options. Remember that in order to
access each parameter it is necessary to push the encoder:
OPTIONS MENU
LOGO: <Limit
MENU LOCK: off
DIMMING: on
By increasing the
c o n t r a s t t h e
s c r e e n c a n b e
easily seen from
lower positions.
A. User can LOCK the Display and Master Volume Control by enabling this option MENU LOCK: ON
B. User can LOCK the Display and Master Volume Control WITH PASSWORD by enabling this option MENU LOCK: pw292
In case A to unlock just press the encoder: In case B to unlock PUSH encoder and enter the 3 digit password (292):
STAND-BY:When no signal is detected the amplifer shuts down. Time can be selected
This option resets the device to the following values: