SDS

7.1
7.2
7.3
8.1
8.2
9.1
10.1
10.2
10.3
10.4
10.5
10.6
Section 7 : Handling and storage
Occupation hygiene :
During normal use no physical hazards are known.
Please refer to Section 6, if leakage occurs.
Precautions for safe handling
Recommendations :
Keep out of reach of children and do not dismantle battery pack.
Do not give mechanical shock or deform. Do not use unauthorized charging
method.
sea water, strong acids, conductive packaging, or near sources of static
electricity.
Make sure battery pack is dry before insertion into printer or scanner.
Specific end uses:
Power source for designated scanners and printers
Section 8 : Exposure controls / personnel protection in case of electrolyte leakage
Safe storage :
Do not store battery pack in high or freezing temperatures, or in high humidity.
Keep battery pack out of direct sunlight, away from heat and fire sources.
Do not store battery packs with oxidizing agents, explosives, metalware, water,
Engineering controls :
Proper ventilation
Control parameters :
ACGIH has not specified electrolyte control parameter.
Exposure controls
Environmental exposure
controls :
Not established
Personal protection :
Respirator with air cylinder and dust mask.
If there is a possibility of electrolyte exposure, wear protective gloves, clothing,
eye, and face protection.
Appearance :
Rectangular solid in solid state plastic casing
Odor :
None
Normal voltage :
3.6 volts DC
Section 9 : Physical and chemical properties
Physical and chemical properties
Chemical stability :
Stable under normal temperature and pressure
Section 10 : Stability and reactivity
Reactivity :
Stable under normal temperature and pressure
Crushing, deformation, or damage to container that may cause laekage of
contents.
Incompatible materials :
Oxidizing agents, explosives, metalware, water, sea water, strong acids,
conductive packaging, and sources of static electricity.
Hazard reactions :
None under normal use
Conditions to avoid :
High and freezing temperatures, and high humidity.
Hazard decomposition :
Acrid or harmful gas can be emitted during leakage or fire.
SDS D181A 3
Version 3.9 (USA)
Release Date 2/14/20