SDS

4.1
4.2
5.1
5.2
5.3
6.1
6.2
6.3
6.4
Section 4 : First aid measures
Description of measures
For spilled internal cell materials
Eyes :
Do not rub eyes. Immediately flush eyes with water continuously for 15 minutes.
extraneous matter or contact region with soap and water.
Inhalation :
Victim should blow out his/her nose and gargle. Seek medical attention
Seek medical attention immediately.
Skin :
Remove contaminated clothes and shoes immediately. Immediately wash
medical personnel. Seek medical attention immediately.
Section 5 : Fire-fighting measures
immediately.
For spilled internal cell materials and battery cell
Ingestion :
Wash out mouth thoroughly. Do not make victim vomit, unless instructed by
Unsuitable media :
None
Special hazards from
Corrosive gas may be emitted during fire.
mixture :
Firefighters :
Use PPE, extinguish fire from windward side, avoid a leeward position.
Extinguishing media
Suitable media :
Water spray, dry chemical, carbon dioxide, or alcohol resistant foam.
Emergency responders:
Use protective glasses and gloves. Move collected materials away from fire.
Environmental precautions : Do not release to sewer, surface, or ground water.
Methods and material for containment and clean-up
Spill containment :
Use sponges to wipe-up electrolyte.
Section 6 : Accidental electrolyte release measures
Personal precautions, protective equipment, and emergency procedures
Non-emergency
Eye and skin protection required during clean-up. Use proper ventilation.
personnel :
Other information :
Do not dispose of waste to sewer.
Reference to other sections : Please refer to Section 13 for disposal.
Spill clean-up :
Clean area with dry cloth. Place waste in closed container for disposal.
Wash hands with soap and water.
SDS D181A 2
Version 3.9 (USA)
Release Date 2/14/20