User Manual

24
• Only use a lancet authorized by LabStyle Innovation
Ltd. (30G).
• If the lancet does not set into place or the lancet
holder does not hold the lancet properly, insert
another sterile lancet.
• If the problem persists, you may need to replace
your Dario Housing. Contact customer support toll-
free in the U.S. at 1-800-895-5921, 9:00 AM-5:00 PM
EST Monday through Friday. Internationally visit
www.mydario.com.
5. Carefully twist off the lancet cap, as shown in the image below. Ensure
that you do not bend the lancet while removing the cap.
Setting Lancet Depth (Optional)
You can adjust the puncture depth of the lancet by moving the lever between
the numbers 1 and 4 (printed on the dial). 1 is the shallowest depth and 4 is
the deepest. It is recommended that you start with the lancet depth set to 1
and adjust the level upwards if necessary.
To set lancet depth:
1. Move the lancing device lever so that the line on the lever is aligned with
the correct depth number, as shown in the image below.