User Manual

Component

Description

Glucose Meter

(A) Dario LC Meter

(B) Dario LC Meter

release panel

The miniature glucose meter consists of the

following components:

• A Lightning connector that is plugged into the

Lightning port of your smart mobile device.

• A strip port for insertion of the test strip.

The glucose meter receives its power from the

mobile device. It does not require batteries or any

other electrical source. When not in use, the meter

snaps into its slot in the housing for protected

storage.

(J) Dario Housing

The Dario Housing (also referred to as the device

housing or simply “housing”) is the main part of the

Dario all-in-one device. It holds all the parts in place

and consists of the lancing device, the meter slot,

and the housing for the test strips cartridge.

Lancing Device

and Cover

(orange)

(D) Disposable

lancet

(E) Lancet release

button

(D) Lancet loader

(G) Lancet depth

lever

The lancing device is built into the housing and uses

disposable Dario Lancets. The orange lancing device

cover prevents the user from unintentional

punctures. You must change lancets after each use.

For more information about using the lancing device,

refer to CHAPTER 4 TESTING YOUR BLOOD GLUCOSE

LEVEL on page 40.

(H) Test strip

cartridge

Each test strip cartridge holds 25 strips. Test strips

are sold separately.

The cartridge snaps into the modular Dario Housing.