User Manual

43
Do not apply blood or control solution to the test strip before inserting it
into the glucose meter.
Do not reuse test strips. Once control solution or blood is placed on a test
strip, discard the strip. If you need to retest, use a new test strip.
Do not bend, cut, or alter the test strips.
Do not get dirt, food, or other substances on the test strip.
It is recommended that you use the test strip immediately after removing
it from the cartridge. It is not recommended that you use a test strip that
has been outside of the cartridge for more than three (3) minutes.
Do not touch the yellow testing site when handling the test strip.
Do not use a damaged test strip.
Make sure that the gold contact area of the test strip is clean from dirt,
blood, moisture, and any other material. An unclean test strip will affect
the test result and can cause an inaccurate blood glucose level result.
Factors That Interfere with Blood Glucose Testing
Certain substances can interfere with the blood glucose system and cause
inaccurate results. For more information, refer to the test strip package insert.
If you are taking medication or dietary supplements, consult your health care
provider.
You should not use this system to test your blood glucose if you
are critically ill (examples include: severe hypotension or shock,
hyperglycemic-hyperosmolar state, hypoxia, and diabetic
ketoacidosis).
Certain health conditions, such as serious illness and
dehydration, can cause false test results in glucose meters. If you
are very sick or think you are dehydrated, or are urinating
frequently, call your health care provider immediately.
Dirty or wet hands could affect your results. Alcohol can affect
test results.
!