User Manual

35
You should use the test strip immediately after removing it from
the cartridge. It is not recommended that you use a test strip that
has been outside of the cartridge for more than three (3)
minutes.
If the cover does not close properly, the cartridge may not have
been inserted correctly. Ensure that you have correctly, returned
the cartridge cover to the closed position as described in step 4.
• Do not touch the yellow testing site when handling
the test strip.
• Do not use a damaged test strip.
Performing a Control Solution Test
To perform a control test:
1. Tap the Dario icon on your smart mobile device to launch the Dario App.
The First Entry screen appears, as shown in the image below.
2. Insert the meter into the Lightning port of your smart mobile device, as
shown in the image below.
A “Connecting...” message appears in the Dario App and then the screen
displays the following instruction: INSERT A NEW STRIP.
!
!