User Manual

21
Assembling the Dario LC System for the First Time
To set up the Dario LC System for the first time, you must complete the
following procedures:
• Insert a test strip cartridge, as described in Inserting the Test Strip
Cartridge on page 21.
• Insert a lancet, as described in Inserting a Lancet on page 22.
• Set the lancet depth, if desired, as described in Setting Lancet
Depth (Optional) on page 24.
• Download and install the Dario App to your smart mobile device,
as described in Downloading and Installing the Dario App on page
25.
• Set up the Dario App on your smart mobile device using the Dario
App instructions or the instructions provided on the Dario website
at www.mydario.com.
Both ends of the Dario Housing have covers that are removable.
The lancet cover is orange with the small opening. Be careful not
to put the cartridge cover on the lancing end. This can damage the
lancet and the lancing device.
Inserting the Test Strip Cartridge
To insert the test strip cartridge:
1. Remove the carbon paper from the device and open the white cover.
2. Remove the new test strip cartridge from its pouch.
3. Hold the test strip cartridge with the side that opens facing up, as shown
in the image below.
!