User's Manual
Table Of Contents
- Multiple Power-Saving Modes ‧The mouse can be manually set to sleep mode by simultaneously pressing all three buttons (both the Left and Right mouse buttons and the Scroll Wheel button at the same time). Press any mouse button to resume normal mouse operation. ‧This mouse will go into an automatic sleep mode after it has not been used for a period of time. Also press any button to go back to its working mode. ‧When the wireless USB mini receiver is stored in the smart receiver storage compartment, the mouse will go into an automatic sleep mode. ‧Simply power off the power switch on mouse bottom. ‧This mouse will go into an automatic sleep mode whenever the signal link with the wireless USB mini receiver is lost, or whenever it is unplugged.
- FCC Statement
- Warning!
and that you change all of the batteries at the same time.
2. Please follow the diagram for battery installation direction. It is recommended to
use 2 AA alkaline batteries. Ensure battery polarity matches the polarity markings
on the battery compartment.
3. This mouse also allows you to work with merely a single battery.
Hardware Installation
Step 1: Press the front wireless USB mini receiver eject
button located on the battery cover as indicated, then
pull out and remove the wireless USB mini receiver
from the mouse.
Step 2: With your computer turned on, plug the wireless USB mini receiver into an
available USB port on your computer.
Step 3: The system will automatically detect the new hardware and install the device
ready for use.
Step 4: Proceed to 'Establishing a Wireless Connection' to complete the installation.
Establishing a Wireless Connection
Once the wireless USB mini receiver is connected to your PC, a wireless connection
will need to be established between it and the mouse:
Step 1: Be sure to power on the power switch of mouse base.
Step 2: Ensure the mouse and wireless USB mini receiver are set up as described in
‘Battery Installation’ and ‘Hardware Installation
’
Step 3: Press the CONNECT button on the wireless USB mini receiver, then press the
CONNECT button on the mouse base.