User's Manual

Step 2. Restart the computer.
Step 3. System will automatically detect for new hardware.
Step 4. Follow system’s setup instruction.
For PS/2 (If no USB port)
Step 1. Plug the green PS/2 adapter into PS/2 Mouse port on computer
Step 2. Plug the purple PS/2 connector into PS/2 keyboard port on computer.
Step 3. Restart your computer.
− Synchronizing the receiver with wireless keyboard and mouse
Step 1. Press the connect button on top of the receiver (The LED on receiver will start
to blink once the button is pressed.), then use a pointy object (e.g. the ink
point of a pen) to press the connect button on the bottom side of the mouse
within 10 seconds.
Step 3. If the mouse does not connect, please repeat the steps above.
−