User's Manual

Bluetooth Universal Keyboard User Manual
Page 8
Link Behavior
Before first connection to your Pocket PC
Keyboard will get into paring mode when power on and the LED will
flash slowly when waiting to connect to your Pocket PC. If not inquired
by any Bluetooth handheld in five minutes, the keyboard will get into
sleep mode. To get into paring mode, you need to awake the keyboard
either by power on the keyboard again or by pressing the connect button.
After the first connection was build in HID profile:
The keyboard will get into pairing mode automatically (the LED flash
quickly) when you remove Bluetooth Dongle on your Pocket PC or when
you take your Pocket PC out of communication distance or when you
power on the keyboard again. The keyboard will get into sleep mode after
three minutes if not inquired by any Bluetooth handheld. To active the
connection, you only need to power on again or press any key on
keyboard. Do not press connect button again.
Note: There is a virtual link between the keyboard and your Pocket PC
when the first connection was built in HID mode. Once the
keyboard is paired to a PC, it cannot link to other Bluetooth
handholds anymore. Please press connect button to release the
virtual link and pair the keyboard to another Bluetooth handheld.