User's Manual

Cellular M2M-IoT Gateway
IOG761AM-0P001 Quick Installation Guide 12
Chapter 2 Getting Started
This chapter describes how to install and configure the hardware and how to use the
set-up wizard to configure the network with the web GUI of IOG761 series.
2.1 Hardware Installation
2.1.1 Mount the Unit
The IOG761 series can be placed on a desktop, mounted on the wall, or mounted on a
DIN-rail. It has designed with “ears” for attaching to the wall or the inside of a cabinet. The
wall-mount kits and DIN-rail bracket are not screwed on the product when out of factory.
Please screw the wall-mount kits and DIN-rail bracket on the product first.
2.1.2 Insert the SIM Card
WARNNING: BEFORE INSERTING OR CHANGING THE SIM CARD, PLEASE MAKE
SURE THAT POWER OF THE DEVICE IS SWITCHED OFF.
The SIM card slots are located at the bottom side of IOG761-0P001 housing in order to
protect the SIM card. You need to unscrew and remove the outer SIM card cover before
installing or removing the SIM card. Please follow the instructions to insert a SIM card.
After SIM card is well placed, screw back the outer SIM card cover.
Step 1:
Follow red arrow to
unlock SIM socket
Step 2:
Lift up SIM holder,
and insert SIM card
Step 3:
Put back SIM holder,
and follow red arrow
to lock SIM socket