User's Manual

− Synchronizing the wireless receiver with wireless keyboard and mouse
Step 1. Press the connect button on top of the receiver (The LED on receiver will start
to blink once the button is pressed), then press the button on the bottom of
keyboard within 10 seconds of pressing the connect button on top of the
receiver.
Step 2. Press the connect button on top of the receiver (The LED on receiver will start
to blink once the button is pressed.), then use a pointy object (e.g. the ink
point of a pen) to press the connect button on the bottom side of the mouse
within 10 seconds.
Step 3. If the keyboard or mouse does not connect, please repeat the steps above.
− Software Installation (for hotkey functions)
Step 1. Insert driver CD into CD-ROM or DVD drive.
Step 2. The installation program should run automatically. If not, double click
“setup.exe”
Step 3. The onscreen setup will guide you through rest of the installation process.
Step 4. After the software installation is completed, you will be prompted to restart your
computer.
Congratulations!
Your BenQ AM730 wireless keyboard is now ready to use.