Owner's manual

XT-3000

DRILL SHARPENER

XT-3000 Features

The XT-3000 was designed incorporating Versatility, Simplicity & Expandability. Optional attachments

sharpen other cutting tools including step drills, brad points, larger drills, Weldon and single flute

countersinks. This unit is an upgrade-able sharpener that grows with your needs. Simplicity will allow

multiple users successful results with minimal training.

Specifications for 115V & 230V

· Standard Grinding Wheels: 180 Grit CBN - HSS, Cobalt & 180 Grit Diamond - Carbide

· Max Wheel Diameter: 6.45 inch ( 164 mm)

· Arbor Size: 1.25 inch (31.75 mm)

· Wheel Surface Speed: 75 ft/sec (23m/sec) for 60 Hz Model 115V

95 ft/sec (29m/sec) for 50 Hz Model 230V

· Motor Specs: ¼ hp - 2850 rpm – 60 Hz Model 115V

¼ hp - 3450 rpm – 50 Hz Model 230V

· Operating Time: Continuous Duty

· Voltage: 115 VAC +/- 10% & 230 VAC +/- 5%

· Frequency: 60 Hz +/- 5% - Model 115V

50 Hz +/- 5% - Model 230V

· Sharpener Current: 2.5A Run / 40A Start Model 115V

1.6A Run / 25A Start Model 230V

· Accessory Current: 6.0A Run Max.

· Operating Temperature: 40° to 95° F ambient (4° to

35° C)

. Humidity: Non-condensing

XT-3000 Specification Sheet