Assembly Instructions

#3L
#3R
3. Insert prepared bolt assemblies in the two front
corners and secure using the Allen wrench (#F).
Insert screws (#G) at a diagonal into the the pre-drilled holes along
the sides of the support legs. Secure using a Phillips screwdriver.
Make sure all parts and
bolts are firmly secured.
1. Prepare 4 bolt assemblies by first
inserting a lock washer (#D) onto
the bolt (#B) then a flat washer (#E)
onto that same bolt (#B), in that
order. Insert into holes and secure
using the Allen wrench (#F).
2. Align the left and right front legs (#3) to the pre-
drilled holes in the front corners of the seat (#2). As
you align the legs, insert the front leg support (#5)
and leg supports (#4R/L) into the designated slots
along the sides of the legs. Note: right and left are
determined by facing the front of the chair in its
upright position.