Assembly Instructions

I. Carefully place the backrest with
legs (#1) onto a protected surface.
II. Align the seat (#2) to the two center
pre-drilled holes along the
front of the backrest with legs (#1).
III. Prepare 2 bolt assemblies by first
inserting a lock washer (#D) onto
the bolt (#C) then a flat washer (#E)
onto that same bolt (#C), in that
order. Insert into holes and secure
using the Allen wrench (#F).
Prepare 4 bolt assemblies by first
inserting a lock washer (#D) onto
the bolt (#A) then a flat washer (#E)
onto that same bolt (#A), in that
order. Insert into holes and secure
using the Allen wrench (#F).