User Manual

1. Prepare 2 bolt assemblies by first inserting
a lock washer (#D) onto the bolt (#B) then
a flat washer (#E) onto that same bolt (#B).
2. Place the backrest (#1) onto a protected
surface, then align the seat (#2). Insert
the bolt assemblies into the center holes
and secure using the Allen wrench (#F).
1. Prepare 4 bolt assemblies
by first inserting a lock
washer (#D) onto the bolt
(#A) then a flat washer (#E)
onto that same bolt (#A).
2. Insert 2 bolt assemblies
into each back corner of
the seat (#2) and secure
using the Allen wrench.