Installation & Assembly

2. Align the shelf panel (#2) to
the holes along the three legs
(#3), then insert a bolt assembly
into each corner and secure
using the Allen wrench (#E).
1. Prepare 3 bolt assemblies by first inserting
a lock washer (#B) onto the bolt (#D) then
a flat washer (#A) onto that same bolt (#D).
2. Insert the threaded ends of last leg (#3) into the holes along the corners of the
center part of the table, then apply a flat washer (#A), a lock washer (#B), and a
hex nut (#C) in that order onto the threaded ends. Secure using the wrench (#F).
1. Prepare 2 bolt assemblies by first inserting
a lock washer (#B) onto the bolt (#D) then
a flat washer (#A) onto that same bolt (#D).
3. Apply a bolt assembly into
each shelf and secure using
the Allen wrench (#E).