Installation & Assembly

1. Place the table top face (#1)
down onto a protected surface.
2. Insert the threaded ends of
three legs (#3) into the holes
along the corners of the center
part of the table, then apply a
flat washer (#A), a lock washer
(#B), and a hex nut (#C) in that
order onto the threaded ends.
Secure using the wrench (#F).
2. Align the shelf panel (#2) to
the holes along the three legs
(#3), then insert a bolt assembly
into each corner and secure
using the Allen wrench (#E).
1. Prepare 3 bolt assemblies by first inserting
a lock washer (#B) onto the bolt (#D) then
a flat washer (#A) onto that same bolt (#D).