Assembly Instructions ASSEMBLY RATING The Assembly Rating is a 5-point system that shows the degree of effort needed in Allen Wrench assembling a specific product (with 1 being easy and 5 being difficult). For some Wrench products, two persons are recommended.
ASSEMBLY & CARE ADVICE FOR YOUR FURNITURE TO LAST CORRECT ASSEMBLY AND PROPER MAINTENANCE ARE NECESSARY, PLEASE FOLLOW THE INFORMATION PROVIDED BELOW TO FULLY ENJOY YOUR FURNITURE. BASIC ASSEMBLY TECHNIQUES Wuhan lock or spring washer is used in an assembly, please make sure the lock ur spring washer is placed between the larger flat washer and the head of the screw or boll.
Before you begin, please read Page 2 of "Assembly and Care Advice". And remember, do not tighten until each step is completed or instructed.
1. With the help of another person, carefully plus the Table top (#1) facing down an a protected surface. Then align the lags #2) © the pees drilled holes on Ge table top (81). 11, Prepare § bolt assemblies by FIRST inserting the lock onto the bolt (3D) then the flat washer#C) write that SAME Holt (#0) and secure using the Winchell.
rk Before you begin, please read Page 2 of "Assembly and Care Advice". And remember, do not tighten until each step is completed or instructed.
#C x apes #D x apes #E x apes I. Align the seat (£2) with the per-drilled holes of the backrest with legs {#1} H.
ko Align the front right log (RR) and lah leg (#31) fo the seat (#2) H. Prepare 4 bolt assemblies by FIRST Inserting the lock washer (fj onto the bolt (9B) then the flat washer (BE) onion the SAME bolt #8), In halt order, Insert the bolt assemblies through the preinstalled holes in fhe comers of the erst (88) and secure those bolt using the Allen wrench (HF), #B x pecs #D x poss #E x pecs 1, Align the front leg support! and R8L supports In the designated slots along the legs. 1.
