Assembly Instructions

1. Carefully unpack and lay out the parts
as shown in illustration.
2. Screw the tube(B), (C),column section(D)and
socket section(E)into the base section(A),then
pull the cord from base.
3. Insert the harp(F) into the saddle of the socket section(E).
4. Place the shade on harp(F), then tightening it by
finial (G),then adjust the shade in balance.
Your lamp now is ready to enjoy
IMPORTANT SAFETY INSTRUCTIONS:
THIS PORTABLE LAMP HAS A POLARIZED PLUG (ONE BLADE IS WIDER THAN THE OTHER)
AS A SAFETY FEATURE TO REDUCE THE RISK OF ELECTRIC SHOCK. THIS PLUG WILL FIT
IN A POLARIZED OUTLET ONLY ONE WAY. IF IT DOES NOT FIT FULLY IN THE OUTLET,
REVERSE THE PLUG. IF IT STILL DOES NOT FIT, CONTACT A QUALIFIED ELECTRICIAN.
NEVER USE WITH AN EXTENSION CORD UNLESS THE PLUG CAN BE FULLY AND EASILY
INSERTED. DO NOT ATTEMPT TO ALTER THE PLUG.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Use 3-way 150 Wattage (Maximum)type A bulb
And 3*40 Wattage (Maximum) type B bulb
(Bulb not included)
ASSEMBLY INSTRUCTIONS