Installation & Assembly

Page 5 of 5

I. With the help of another person,

carefully align the table top (#1)

with the pre-drilled holes of the

leg support A (#3).

II. Prepare 8 bolt assemblies by

inserting FIRST the lock washer

(#C) onto the bolt (#B) and then

the flat washer (#D) onto the

SAME bolt (#B), in that order.

III. Insert the bolt assemblies

through the pre-drilled holes of

the leg support A (#3) and secure

those bolts using the Allen

wrench (#E) to lock them in with

the table top (#1).

#B x 8 pcs

#C x 8 pcs

#D x 8 pcs

Turn right (clockwise) to tighten

ASSEMBLY IS COMPLETED

Make sure the table is rested on a flat surface and it does

not feel loose or wobbly. If it does, double check that the

bolts are secured and properly tighten.