Installation & Assembly

ManualsBrandsDarby Home Co ManualsFurnitureSeddon Kitchen Island

(Oak Finish)

IMPORTANT NOTE

Carefully remove all the parts from the carton and put

them individually on a soft cloth to prevent scratches

or other damages occuring to the wood parts.

We have taken great care in the design of this product

and request that you carefully and strictly follow our

assembly instructions to ensure a completed product

as it was designed.

Tools required for assembly : Phillips screwdriver

Top Unit

1 pc.

Part List

Summary of content (6 pages)

PAGE 1
(Oak Finish) IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the wood parts. We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed. Part List A. Top Unit 1 pc.
PAGE 2
IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the wood parts. We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed. Part List (in this carton) B. Top 1 pc. C. Back Stretcher 2 pcs. D. Back Stretcher 1 pc. E. Middle Panel 1 pc. F. Rail 2 pcs. G. Shelf 4 pcs. N.
PAGE 3
IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the wood parts. We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed. Part List (in this carton) M. Side Panel 2 pcs. L. Leg 1 pc. K. Leg 1 pc. J. Leg 1 pc. I. Leg 1 pc. O. Shelf 4 pcs.
PAGE 4
Assembly Instructions 2/4 IMPORTANT Do not tighten up all the screws until each part is properly assembled. You should keep Hex Wrench in the safe place as you may need to tighten up the Head Cap Bolts in the future. L K STEP 1 Cam Lock Screw Put Cam Lock Screws into the pre-drilled holes of Leg (K),(L) and tighten. Cam Lock K C N D N C L STEP 2 Attach Back Stretcher (C) to Leg (K) using Cam Locks. Attach Back Stretcher (D) to Back Stretcher (C).
PAGE 5
Assembly Instructions 3/4 Head Cap Bolt H E STEP 3 Attach unit from Step 2 and Middle Panel (E) to Base (H) with Head Cap Bolts. Head Cap Bolt J H M I M STEP 4 Attach Leg (I) and (J) to Base (H) with Head Cap Bolts. Slide Side Panels (M) into position.
PAGE 6
Assembly Instructions 4/4 Head Cap Bolt STEP 5 F Attach Rail (F) to unit with Head Cap Bolts. F Machine Screw Pull Handle Insert Adjustable Pins Into both side panels and Middle Panels at the desired level. Slide Shelf (G) into place. G P G Assemble Pull Handle to Door (P) and (Q) with Machine Screws. (see Figure 1) Attach Door (P) and (Q) to the side panels by sliding the door lift hinges into the side panel lift hinges.