User`s manual

PCI-FRM01 User’s Manual (Rev 1.1)
-7-
3. Installation
3.1 Package contents
In addition to the user’s Manual, the package includes the following items.
- PCI-FRM01 board
- CDROM (drivers/manuals/API/Samples etc.)
After unpacking, inspect the board carton to make sure there are no damages on the board.
[Figure 3-1. PCI-FRM01 package contents]
3.2 Installation Sequence
To install your PCI-FRM01 board in your PC, follow the steps described in the document “How to install
PCI DAQ Board” provided by DAQ System. If the document is missing, you can get it from
www.daqsystem.com. The PCI-FRM01 board is completely Plug & Play. There are no switches or jumpers to set.
Therefore you can install it easily.
- Your OS requirement : Windows 2000 SP4 or Windows XP SP1 above
The PCI-FRM01 connects to PCI slot. After that you can show the below picture of “New Hardware Search
Wizard” window.