User`s manual

PCI-FRM01 User’s Manual (Rev 1.1)
-24-
(PCI_FRM01.DLL) must be located in the same directory with the execution file or Windows system folder.
Another method is to add the directory of API DLL file to PATH environmental variable.
5.1.1 Functions related to image Frame
(1) ‘DXD810/DXD1417’ Combo-box
Use this box to set up the operation mode of the PCI-FRM01.
(2) ‘LVDS Init’ button
Press this button to initialize the function of receiving image frame data. It is performed only once after
power is applied to the board.
(3) ‘Start’ button
Press this button to begin to save image data.
(4) ‘FRAME Read’ button
Press this button to read the image frame data of the PCI-FRM01 board to your PC. If image frame data
is not saved on the board, you must wait until the end of data collection.
(5) ‘LVDS Close’ button
Press this button to finish usage of the board and terminate the program.
(6) ‘Save to’ button
Press this button to save the image frame data of PC to a file.
5.1.2 Functions related to UART
(1) ‘Send Serial Data’ button
Press this button to send the data in the editor box to UART. You can directly write the data in the
editor box beside the button.
(2) ‘Get Serial Data’ button
Press this button to get the data on the general UART.
(3) ‘Clear Serial Data’ button
Press this button to clear the contents of the editor box.