User`s manual

PCI-FRM01 User’s Manual (Rev 1.1)
-19-
[Other Connectors]
2 1
J5
J5 connector (Top View)
The PCI-FRM01 board power is supplied through the PCI connector for the normal operation. However, the
power will be supplied through the J6 connector in case of the board self-test or check the power.
+5V is connected to pin number 1 and ground is connected to pin number 2.
3
6
1
2
5
4
J3
J3 connector (Top View)
J3 can be use for the board self-test or the production line, usually do not use at the normal operation.
3
6
1
2
5
4
JP2
JP2 connector (Top View)
JP2 can be use for the FPGA program up-grade, usually do not use at the normal operation.
3
6
12
5
4
GND VCC(+3.3V)
TDO
TMS
TCK
TDI
JP1
JP1 connector (Top View)
JP1 can be use for the FPGA functional test at the production line, usually do not use at the normal
operation.