User manual

Chapter 1 BNC-2090A Overview
© National Instruments Corporation 1-3 BNC-2090A User Manual
❑ Small flathead screwdriver
❑ Four adhesive rubber feet (supplied)
You can find detailed specifications for the BNC-2090A in Appendix A,
Specifications.
Installing the BNC-2090A
The BNC-2090A Quick Start Guide contains general installation
information for the BNC-2090A. To connect the BNC-2090A to your DAQ
device, refer to Figure 1-2 as you complete the following steps. Consult
your computer user manual or technical reference manual for specific
instructions and warnings.
Note If you have not already installed your DAQ device, refer to the DAQ Getting Started
Guide for instructions.
Figure 1-2. Connecting the BNC-2090A to Your DAQ Device
1. Verify that the SE/DIFF switches and RSE/NRSE switch are set
correctly for your current application, as described in Chapter 2,
Connecting Signals.
1 BNC-2090A
2 Shielded Cable
3 E/M Series DAQ Device
4 Personal Computer
N
A
T
IO
N
A
L
IN
S
T
R
U
M
E
N
T
S
B
N
C
-
2
0
9
0
A
1
4
2
3