User manual

Appendix A Device-Specific Information
E Series User Manual A-24 ni.com
NI DAQPad-6016 Pinout
Figure A-21 shows the NI DAQPad-6016 device pinout.
Note Some hardware accessories may not yet reflect the NI-DAQmx terminal names. If
you are using an E Series device in Traditional NI-DAQ (Legacy), refer to Table 1-5,
Terminal Name Equivalents, for the Traditional NI-DAQ (Legacy) signal names.
Figure A-21. NI DAQPad-6016 Pinout
For a detailed description of each signal, refer to the I/O Connector Signal
Descriptions section of Chapter 1, DAQ System Overview.
NI 6020E Family
The DAQPad-6020E is a Plug-and-Play, USB-compatible multifunction
AI, AO, DIO, and TIO device for USB-compatible computers. The
DAQPad-6020E features the following:
• 16 AI channels (eight differential) with 12-bit resolution
• Two AO channels with 12-bit resolution
• Eight lines of TTL-compatible DIO
• Two 24-bit counter/timers for TIO
• A 68-pin I/O connector