User manual

Appendix A Specifications

RTSI

Trigger lines ........................................... 7

Calibration

Recommended warm-up time ................ 15 minutes

Interval ................................................... 1 year

External Calibration reference ............... > 6 and < 10 V

Onboard calibration reference

Level ............................................... 5.000 V (±3.5 mV)

(over full operating temperature,

actual value stored in EEPROM)

Temperature coefficient.................. ±5 ppm/°Cmax

Long-term stability ......................... ±15 ppm/

Power Requirement

+5 VDC (±5%)....................................... 0.9 A

Note

Excludes power consumed through V

available at the I/O connector.

Power available at I/O connector ........... +4.65 to +5.25 VDC at 1 A

Physical

Dimensions (not including connectors)

PCI devices ..................................... 17.5 by 10.6 cm (6.9 by 4.2 in.)

PXI devices ..................................... 16.0 by 10.0 cm (6.3 by 3.9 in.)

I/O connector.......................................... 68-pin male SCSI-II type

Environmental

Operating temperature............................ 0 to 55 °C

Storage temperature ............................... –20 to 70 °C

Humidity ................................................ 10 to 90% RH, non-condensing

1,000 h

UM.book Page 9 Monday, May 14, 2001 10:32 AM