User manual

Chapter 1 Introduction
© National Instruments Corporation 1-3 NI 6034E/6035E/6036E User Manual
What You Need to Get Started
To set up and use your device, you need the following:
❑
At least one of the following devices:
– PCI-6034E
– PCI-6035E
– PXI-6035E
– PCI-6036E
– PXI-6036E
❑ NI 6034E/6035E/6036E User Manual
❑
NI-DAQ software
(for PC Compatibles or Mac OS
1
)
❑
One of the following software packages and documentation:
– LabVIEW
(for Windows or Mac OS
2
)
– Measurement Studio
(for Windows)
❑
Your computer or PXI/CompactPCI chassis and controller (hereafter
referred to as your computer)
Table 1-1.
Pins Used by the PXI-6035E/6036E
PXI E Series
Signal
PXI Pin Name PXI J2 Pin Number
RTSI<0..5> PXI Trigger<0..5> B16, A16, A17, A18, B18, C18
RTSI 6 PXI Star D17
RTSI Clock PXI Trigger 7 E16
Reserved LBL<0..3> C20, E20, A19, C19
Reserved LBR<0..12> A21, C21, D21, E21, A20,
B20, E15, A3, C3, D3, E3,
A2, B2
1
The PCI/PXI-6036E does not support NI-DAQ for Mac OS.
2
The PCI/PXI-6036E does not support LabVIEW for Mac OS.
UM.book Page 3 Monday, May 14, 2001 10:32 AM