User manual

Index
NI 6034E/6035E/6036E User Manual I-2 ni.com
specifications
accuracy information, A-4 to A-5
dynamic characteristics, A-6 to A-7
output characteristics, A-4
stability, A-7
transfer characteristics, A-5
voltage output, A-6
AOGND signal
analog output signal connections, 4-18
description (table), 4-3
I/O signal summary (table), 4-5
B
bipolar input range, 3-3
block diagram, 3-1
C
cables
See also I/O connectors.
custom cabling, B-1
fieldwiringconsiderations,4-41to4-42
optional equipment, 1-5 to 1-6
calibration
adjusting gain error, 5-3
external calibration, 5-2
loading calibration constants, 5-1 to 5-2
self-calibration, 5-2
specifications, A-9
charge injection, 3-4
clocks, device and RTSI, 3-6 to 3-7
commonly asked questions. See questions and
answers.
common-mode signal rejection
considerations, 4-17
CompactPCI,usingwithPXI,1-2to1-3
configuration
common questions, C-2
hardware configuration, 2-3
connectors. See I/O connectors.
conventions used in manual, xi to xii
CONVERT* signal
DAQ timing connections, 4-29 to 4-30
signal routing (figure), 3-5
counter/timer applications, C-4
custom cabling, B-1
customer education, D-1
D
DAC0OUT signal
analog output signal connections, 4-18
description (table), 4-3
I/O signal summary (table), 4-5
DAC1OUT signal
analog output signal connections, 4-18
description (table), 4-3
I/O signal summary (table), 4-5
DAQ timing connections
AIGATE signal, 4-30
CONVERT* signal, 4-29 to 4-30
EXTSTROBE* signal, 4-24
SCANCLK signal, 4-23
SISOURCE signal, 4-31
STARTSCAN signal, 4-27 to 4-28
TRIG1 signal, 4-24 to 4-25
TRIG2 signal, 4-25 to 4-26
typical posttriggered acquisition
(figure), 4-22
typical pretriggered acquisition
(figure), 4-23
DAQ-STC,C-1,C-4
DGND signal
description (table), 4-3
I/O signal summary (table), 4-5
DIFF mode
description (table), 3-2
recommended configuration
(figure), 4-10
UM.book Page 2 Monday, May 14, 2001 10:32 AM