User manual

© National Instruments Corporation I-1 NI 6034E/6035E/6036E User Manual
Index
Numbers
+5 V signal
description (table), 4-3
self-resetting fuse, C-2
A
ACH <0..15> signals
analog input modes, 4-8
analog input signal connections, 4-6
description (table), 4-3
I/O signal summary (table), 4-5
acquisition timing connections. See DAQ timing
connections.
AIGATE signal, 4-30
AIGND signal
analog input modes, 4-8
analog input signal connections, 4-6
description (table), 4-3
differential connections, 4-14
I/O signal summary (table), 4-5
AISENSE signal
analog input modes, 4-8
analog input signal connections, 4-6
description (table), 4-3
I/O signal summary (table), 4-5
analog input
See also analog input modes.
common questions, C-2 to C-3
input range
measurement precision (table), 3-3
overview, 3-3
scanning multiple channels, 3-3 to 3-4
signal connections, 4-9 to 4-17
signal overview, 4-6 to 4-9
specifications
accuracy information, A-2
amplifier characteristics, A-3
dynamic characteristics, A-3
input characteristics, A-1 to A-2
stability, A-4
transfer characteristics, A-2
types of signal sources
floating signal sources, 4-7
ground-referenced signal sources, 4-7
analog input modes
available input configurations (table), 3-2
common-mode signal rejection
considerations, 4-17
differential connections
ground-referenced signal sources, 4-12
nonreferenced or floating signal
sources,4-13to4-14
exceeding common-mode input ranges
(caution), 4-8
overview, 3-2, 4-7 to 4-9
PGIA, 4-7 to 4-8
recommended input connections
(figure), 4-10
single-ended connection
floating signal sources (RSE
configuration), 4-16
grounded signal sources (NRSE
configuration), 4-16 to 4-17
analog output
common questions, C-2 to C-3
glitch operation, 3-4
overview, 3-4
signal connections, 4-18
UM.book Page 1 Monday, May 14, 2001 10:32 AM