Product specifications

ManualsBrandsDAPAudio ManualsComputer equipmentPS-112A

PS-112A

Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands

Ordercode: D3575

MANUAL

ENGLISH

Summary of content (12 pages)

PAGE 1
MANUAL ENGLISH PS-112A Ordercode: D3575 Highlite International B.V.
PAGE 2
PS-112A Table of contents Warning ...............................................................................................................................................................................2 Unpacking Instructions .....................................................................................................................................................2 Safety Instructions ..........................................................................................................
PAGE 3
PS-112A Warning FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! Unpacking Instructions Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure that all parts are present, and have been received in good condition. Notify the dealer immediately and retain packing material for inspection if any parts appear damaged from shipping or the carton itself shows signs of mishandling. Save the carton and all packing materials.
PAGE 4
PS-112A                                Do not connect this device to a dimmer pack. Do not drive the inputs with a signal level bigger, than required to drive the equipment to full output. Do not insert objects into air vents. Do not open this device. Risk: hazardous radiation exposure. Do not run the output of any amplifier channel, back into another channel’s input. Do not switch the system on and off in short intervals, as this would reduce the system’s life.
PAGE 5
PS-112A Connection with the mains Connect the device to the mains with the power-plug. Always pay attention, that the right color cable is connected to the right place.
PAGE 6
PS-112A Description of the device Features The PS-112A is an active 12" 2-way Fullrange speakersystem: • Adjustable Line/Mic Input with Combo connector.
PAGE 7
PS-112A Controlpanel BASS - Use to adjust the Bass frequencies to your preference. TREBLE - Use to adjust the treble frequencies to your preference. OVERLOAD LED VOLUME - Use to adjust the volume level for each channel to your preference. COMBO INPUT MIC/LINE BUTTON - Allows you to set the input impedance/ sensitivity to either Line or Microphone level (Line = on, microphone = off). LINK XLR OUTPUT AC POWER SWITCH - This is the main Power switch. Press to turn the PS-112A on.
PAGE 8
PS-112A Connection Cables Take care of your cables, always holding them by the connectors and avoiding knots and twists when coiling them: This gives the advantage of increasing their life and reliability. Periodically check your cables. A great number of problems (faulty contacts, ground hum, discharges, etc.) are caused entirely by using unsuitable or faulty cables.
PAGE 9
PS-112A Maintenance The PS-112A requires almost no maintenance. However, you should keep the unit clean. Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in liquid. Keep connections clean. Disconnect electric power, and then wipe the audio connections with a damp cloth. Make sure connections are thoroughly dry before linking equipment or supplying electric power.
PAGE 10
PS-112A Product Specifications Power supply: Fuse: Woofer: High driver: Freq. response: Max. power Low- amp: Max.
PAGE 11
PS-112A Notes Ordercode: D3575 10